PRODUCTS
JQ.ER316LSi-G
Uses:
Chemical Composition(Wt%)
|
Brand |
C |
Mn |
Si |
Cr |
Ni |
Mo |
P |
S |
Cu |
other |
|
JQ.ER316LSi-G |
0.019 |
1.91 |
0.78 |
23.14 |
12.42 |
2.50 |
0.015 |
0.010 |
- |
- |
Product performance
|
Compliance with (equivalent) standard models |
Deposited metal physical properties |
||
|
GB |
AWS |
Mpa |
Elongation% |
|
- |
ER316LSi |
574 |
36.5 |
Reference Current ((AC OR DC-)
|
Wire diameter |
￠0.8 |
￠1.0 |
￠1.2 |
|
|
Welding current |
Flat welding |
70-150 |
100-200 |
140-220 |
| Vertical welding |
50-120 |
80-150 |
120-180 |
|
| Overhead welding |
50-120 |
80-150 |
160-200 |
|
Product supply specifications:
|
Wire diameter |
￠0.8 |
￠1.0 |
￠1.2 |
|
Package |
12.5Kg/Piece | 15Kg/Piece | 15Kg/Piece |
Product use note：
2.Gas flow:20-25L/min.
3.Dry elongation:15-25mm.
4.The welding parts of the rust layer,moisture,oil,dust,etc.in addition to the net.
5.When the outdoor welding when the wind speed is greater than 1.5m/s should take windbreak measures,must have appropriate wind protection measures toprevent the occurrence of pores.
The above recmmendations are for reference only in the specific operation of the prevailing situation prevail. if necessary,first process evaluation and then determine the welding program.